ANNIVERSARY EDITION THERMOVENT FOR YOUR INGLENOOK FIREPLACE – £3800 including VAT
All our Thermovent wood burning open fires are made by hand, but you don’t have to get involved in the design of your fire at all if our Anniversary Edition Thermovent suits your taste and will fit into your Inglenook fireplace. We have also created them as an alternative to a traditional fireplace grate (especially in thatched properties) or a Jetmaster open fire.
The Anniversary Edition is our only pre-set design and was introduced to mark our 40th year in 2012. Since then, many customers have chosen these for their Inglenook Open Fireplace or other styles of open fireplace design if the size suits.
As with all our Thermovent High Performance Fires, they are supplied with the Thermovent fire pit itself and built in convection system and flue baffle control, as well as a hand made steel canopy, dog irons, and grate front ready for installation. Like all Thermovents, yours will be CE marked so any HETAS approved installer near you can install it.
As there is no design work involved, all you need to do is check the dimensions shown below to make sure it will fit into your fireplace (the canopy can be cut down to height by the installer or we can add an extension if its not tall enough), then get in touch to place your order. Delivery is typically 4-6 weeks but we will confirm this at the time of your order and we can ship in a pallet box or you can collect from our workshop.
SIGNIFICANTLY BETTER PERFORMANCE THAN A NORMAL FIRE GRATE OR JETMASTER
As with all our Thermovent fires you get High Performance built in. It’s the most effective freestanding convecting open fire available with CE approval in the UK and will give up to 14.1KW of heat output if required.
As a convecting open fire, Thermovent shares the heat it generates much more effectively than normal open fires and many stoves by pushing the hot air passing through its 7 heat exchange chambers back out into the room – which means that heat isn’t wasted going up your chimney. With a flue baffle built in it also means you can stop the warmth from your other heating systems going up the chimney when the fire isn’t lit.
WHAT OUR CUSTOMERS SAY
“We are SO delighted with the fire!! Literally has transformed our enjoyment of the house and room! Absolutely wonderful and looks terrific – gives off such a great heat too. We’ve had it lit not stop! Many thanks again for such a wonderful job – we couldn’t be more delighted.”
KEY FEATURES OF AN ANNIVERSARY EDITION THERMOVENT FOR YOUR INGLENOOK FIREPLACE
The details, dimensions and information below should allow you, or your local HETAS installer, to check that an Anniversary Edition Thermovent open fire is right for your open fireplace. If there’s anything you are not sure about please don’t hesitate to get in touch. Remember, if this style or dimensions aren’t to your liking we make many of our fires to sizes and specifications to exactly meet customer requirements with our Bespoke and Tailor made packages – so if the sizes don’t suit, its not a problem – we can make a Thermovent that will fit your open fireplace. Just get in touch and we can take it from there.
Hand scored steel canopy.
The canopy on our Anniversary Edition Thermovent high performance open fire is made from sheet steel which is hand cut, scored and rolled to create the distinctive shape of our canopies.
Hand rolled seams are used to join the panels together with rivets using domed caps. A steel bar is rolled into the bottom edge to ensure its straight and holds the shape of the canopy at the base.
The canopy is then coated in heat resistant undercoat and a top coat of grate polish applied. This gives the traditional gun metal fireplace appearance – and is easily maintained.
The steel is then handscored before a heat resistant undercoat is applied followed by the grate polish. This gives the traditional gun metal fireplace appearance – and is easily maintained.
Hand made dog irons.
The dog irons featured with our Anniversary Edition high performance open fire are based on a style that has proved popular with our customers over many years.
We changed the style from 2020 to feature the heavier set design that has become more popular with our bespoke packages.
The horse shoe feet and column are cut from solid steel. Then a forged round bar swan neck is topped with a small cannon ball. The design has plenty of features to make it interesting but without contrasting too much with other designs that may be present in the open fireplace.
Your dog irons will be finished in the same manner as your canopy.
HAND FORGED GRATE FRONT
The grate front links the dog irons to the main Thermovent fire and keeps burning logs within the fire whilst letting you see the flames and allowing air into the fire to burn. We have created many different types of grate front but the upright flat bar with three quarter scroll top has always been popular so we chose this for the Anniversary Edition Thermovent. Made from 1 ¼ inch flat bar each scroll is handforged with a flattened & splayed tip.
ANNIVERSARY EDITION THERMOVENT OPEN FIRE DIMENSIONS & INSTALLATION INFORMATION
The dimensions and information below should allow you, or a local HETAS installer, to check that an Anniversary Edition Thermovent open fire is right for your open fireplace. If there’s anything you are unsure about please don’t hesitate to get in touch. Remember, we make many of our fires to sizes and specifications to exactly meet customer requirements – so if the sizes don’t suit, its not a problem – we can make a Bespoke or Tailor made Thermovent that will fit your open fireplace. Just get in touch and we can take it from there.